Open console
lsblk
whatch output
now put your usb in usb port
lsblk again observe the change
in my case this appears
sdc 8:32 1 14,4G 0 disk
└─sdc1 8:33 1 14,4G 0 part /media/kuba/D53E-93DD
if it is damaged it may look like this
sdc 8:32 1 0 disk`
Anyway if it is mounted unmount it
umount /dev/sdc1
Now on unmouted usb perform
sudo wipefs -a /dev/sdc
sudo fdisk /dev/sdc
m for help
o for new dos partition table g for gpt
I choose o
now n for new
p for primary
now just hit enter 3 times
When and if you see
Partition #1 contains the vfat signature.
Should I remove the signature? [Y]yes/[N]no:
Partition #1 contains the vfat signature.
Should I remove the signature? [Y]yes/[N]no:
Press y
Now press w to write changes
lsblk
now you shood see something like this
sdc 8:32 1 14,4G 0 disk
└─sdc1 8:33 1 14,4G 0 part
sudo mkfs.exfat /dev/sdc1
or
sudo mkfs.fat -F 32 /dev/sdc1
The first command create windows exfat file-system
the second creates fat32
That is a only way formatting a usb pen-drive ensures windows will see the drive properly.
Any Gui mambo jambo gives me more headache then i can stand.
Gui tools works, the pen-drive will be visible on any given linux, but there is no guarantee it will be visible on windows.
If you want to have iso on usb, use balena etcher or dd after wipefs -a /dev/sdx.
Nor balena or dd give rats ass about partitions geometry. They create an image of any given input on a destination device.